Model EL100 Full View Aluminum Garage Doors

• Aluminum is sent through a chemical process that leaves it with an extremely durable anodizing finish

• • • Glass Size Capabilities: Three options of glass thickness available 1/8" / 1/4" / 1/2"
    • Standard Options: Clear Tempered / Frosted Tempered / White Laminate

    *specialty glass available upon request to match a style of your home             

          *Please Note: All glass is tempered except for laminated options.

• Glazing is completed using a butyl tape that adheres the glass to the frame and provides a high quality seal
• Aluminum retainers are snapped in place with a 1/4" EPDM round foam strip between the glass and aluminum retainer acting as another seal and impact dampener

• • • All 2" tracks are 12" or 15" Radius - 14 gauge horizontals with 17 gauge verticals
    • All tracks are mounted with reverse continuous jamb angle
    • Horizontals are reinforced with 13 gauge angle mounted continuous to the length of the horizontal
    • All 3" tracks are 15" Radius - 12 gauge and use is determined by weight of door
    • Options: Low Headroom (0" or 3.5" ), High Lift, Vertical Lift, Follow the Pitch

• • All components are galvanized steel and consist of 14 gauge hinges, 12 gauge top & bottom fixtures
  • 2" nylon 10 ball bearing rollers with long-stem for top & bottom fixtures and short-stem for hinges
  • Inside lock included

 *Please Note: 11 gauge components and 3" steel 10 ball bearing rollers will be used when specified.

• Springs are oil tempered and calibrated per door weight, size and track requirements
• Standard springs are 10,000 cycle
• 25k, 50k, 100k cycle springs are available with an additional cost.
• 12 guage bearing & spring plates
• 16 gauge torsion tube is standard, 14 gauge, 11 gauge and solid shafts are available and used when specified

• (2) 22GA 2-1/4" galvanized steel struts come with every door, 3" when specified

• 4" bulb type bottom weather-seal is standard, 6" available at additional cost

Limited 2 year warranty against cracking, chipping and or fading of the anodized or powder coat finish; limited 1 year warranty on hardware and components.